Mas Maya Coating, while sharing some similarities with other coatings, has unique application methods and characteristics that set it apart. Below is a detailed guide to the installation process:
Surface Preparation
Cleaning and Drying: Ensure the surface is clean, dry, and free of dust, grease, or loose particles.
Repairing Defects: Smooth out and fill any cracks or holes using Mas Maya Base.
Applying Primer: Apply Mas Maya Primer to improve adhesion between the first layer of Mas Maya and the surface. For wood surfaces, apply a layer of mesh over the bonding resin for better adherence.
Mixing
Proportions: Mix Mas Maya Coating powder with clean water at a ratio of 0.5 liters of water per kilogram of powder.
Consistency: Use a drill to mix until you achieve a yogurt-like texture. Let it sit for 5 minutes before use.
Application Process
First Layer:
Technique: Using a microcement trowel, apply a thin, even layer (about 2mm) across the entire surface. Hold the trowel at a low angle (15-30 degrees).
Drying: Allow this layer to dry overnight, avoiding direct sunlight.
Second Layer:
Preparation: Lightly mist the surface with water to extend work time.
Application: Apply the second layer with varied, overlapping trowel strokes at different angles to achieve the desired texture.
Burnishing: Once partially dry, begin burnishing with a clean steel trowel, pressing firmly to create a polished, cloudy/marble effect. Mist with water if needed for additional work time or to achieve a more pronounced effect.
Sanding:
Technique: Use fine-grit sandpaper (200 or 400) to sand the surface until the desired smooth, polished finish is achieved.
Cleaning: Clean the surface thoroughly after sanding.
Sealing (Optional):
Protection: For areas exposed to water, apply a sealer for added water resistance and durability, especially in high-traffic or moisture-prone areas like bathrooms and kitchens.
Special Considerations
Temperature and Humidity: Ideal conditions are between 5° and 35°C. Avoid direct sunlight to prevent cracking.
Layers: One to three layers can be applied depending on the surface and desired finish. Two layers are recommended for bathrooms and pools, and three layers for floors.
Required Tools: Steel, plastic, or wood trowels, sandpaper, buckets, cleaning sponges, water sprayer, painter’s tape, and protective gear.
Mas Maya Coating's natural composition, breathability, and strong adhesion properties make it an ideal choice for covering Gotelé, providing a smooth, elegant, and durable finish suitable for various interior applications.
Mas Maya Coating Application Video