Mas Maya Coating is ideal for furniture, offering a durable, protective finish that resists wear and tear. Free from VOCs, it ensures a safe, healthy environment. The coating adheres well to wood and other materials, providing lasting protection, while adding a smooth, refined finish that enhances the furniture's appearance.

• Mas Maya Coating
• Mas Maya Primer
• Mas Maya Mesh essential for tiles, wood, or uneven/crumbling surfaces)
• Mas Maya Presealer
• Mas Maya Sealer
• Mas Maya Heavy-Duty Sealer
• Steel Trowels (various sizes)
• Fine-Grit Sandpaper (200–400 grit) or Orbital Sander
• Clean Buckets and Sponges
• Painter’s Tape
• Spray Bottle with Water

1. Surface Preparation

• Repair imperfections: Fill any cracks, gaps, or holes and smooth the surface, including
  filling grout lines between tiles. Ensure the surface is flat and smooth before moving
  on.
• For Wet Areas: In areas regularly exposed to water, ensure that the waterproof membrane is intact before applying Mas Maya Coating.
• Apply Primer: Use Mas Maya Primer to improve adhesion.
• Apply Mesh: Lay Mas Maya Mesh on top of the Primer. Allow 30 minutes to partly dry.

2. Mix the Mas Maya Coating

• Optional Pigment: If adding colour pigment, mix it evenly into the water before combining with the coating powder.
• Mix Water and Coating: Add 1/3 liter of clean water for every kilogram of Mas Maya Coating powder.
• Mixing Process: Stir the mixture by hand or with a mechanical drill until smooth and consistent, resembling yogurt. Allow the mixture to rest for 15 minutes, then give it a final stir.

3. Application Process

First Layer:

• Trowel Application: Use a steel trowel to apply a thin layer (~2 mm) across the surface, holding the trowel at a shallow angle (15-30°).
• Mesh: If applying on top of Mas Maya Mesh (e.g. for Floors or Tiles), ensure the first layer completely covers the Mesh.

Second Layer:

• Drying Time: Allow the first layer to dry until it is set but still slightly damp to the touch. This typically takes a few hours, depending on the climate.
• Optional Water Mist: Lightly mist the surface with water to extend working time if needed.
• Trowel Application: Apply the second coat with slightly overlapping strokes at different angles for a more organic finish.

Burnishing:

• When to Burnish: Begin burnishing when the second coat is partially dry but still pliable.
• Process: Lightly spray the material with water and rework it while applying pressure using a clean trowel. This will help create a smooth, polished finish.
• Final Drying: Allow the material to dry overnight.

4. Finishing

• Sanding: Use an orbital sander or fine-grit sandpaper (around 200 grain) to smooth and polish the surface.
• Cleaning: Wipe down the surface to remove any dust.
• Apply Presealer: Use two coats of Mas Maya Presealer, waiting 4 hours between coats.
• Apply Sealer: After 12 hours, apply two coats of Mas Maya Sealer with a short-hair roller.
• Apply Heavy-Duty Sealer: When applying to furniture or worktops, apply an additional two coats of Mas Maya Heavy-Duty Sealer for maximum protection.