Yes, bricklayers can use Mas Maya Coating. While it does not require specialized skills beyond those that a professional bricklayer already possesses, understanding the specific application techniques for Mas Maya can ensure the best results. Here’s a detailed overview of why bricklayers are well-equipped to use Mas Maya Coating and the skills involved:

Why Bricklayers Can Use Mas Maya Coating

1. Relevant Skills:
• Surface Preparation: Bricklayers are experienced in preparing surfaces for various coatings, including cleaning, repairing, and priming. These are essential steps in the application of Mas Maya Coating.
• Trowel Use: Proficiency with a trowel is a core skill for bricklayers, which is crucial for applying Mas Maya Coating smoothly and evenly.
• Mixing Materials: Bricklayers regularly mix mortars and plasters, a skill directly applicable to preparing Mas Maya Coating.
2. Application Process:
• First Layer Application: Applying the first thin, even coat of Mas Maya Coating requires a steady hand and experience with trowel angles and pressure, skills that bricklayers already possess.
• Second Layer Application: Achieving the desired texture with overlapping trowel strokes at different angles is a technique bricklayers can easily adapt to.
• Burnishing/Polishing: The process of pressing firmly with a clean steel trowel to create a polished finish is similar to techniques used in other plastering tasks.
3. Finishing Techniques:
• Sanding: Achieving a smooth finish through sanding is a standard practice for bricklayers, ensuring the surface is prepared for any additional treatments.
• Sealing: Applying sealers for added durability and water resistance is a straightforward process that bricklayers can handle with ease.

Steps to Apply Mas Maya Coating

1. Surface Preparation:
• Ensure the surface is clean, dry, and free from dust, grease, or loose particles.
• Use Mas Maya Base to repair any cracks or holes in the surface. Also, ensure any grouting and gaps between bricks are covered to ensure the area is smooth. The area should be flat before applying Mas Maya Coating.
• Apply Mas Maya Primer to enhance adhesion, especially on non-porous surfaces like tiles, Silestone, or plastic. Follow the manufacturer’s instructions for drying times.
2. Mixing:
• Mix the Mas Maya powder with clean water, using a ratio of 1/3 liter of water per kilogram of powder.
• The powder and material can be mixed by hand or with a mechanical drill. Mix the powder and water until a smooth, yogurt-like texture is achieved. Allow the mixture to rest for 15 minutes before use.
3. Application:
• First Layer:
• Apply a thin, even coat of approximately 2mm of Mas Maya using a steel trowel.
• Let the first layer dry until set but still slightly damp, which usually takes a few hours depending on conditions.
• Second Layer:
• Lightly spray the surface with water to prolong working time.
• Apply the second coat with varied trowel strokes at different angles.
• Let the second coat dry overnight.
4. Finishing:
• Burnishing/Polishing:
• Begin burnishing once the final coat is partially dry but still pliable.
• Use a clean steel trowel in short, overlapping strokes to create a polished finish.
• Sanding:
• Sand the surface with fine-grit sandpaper until smooth.
• Clean the surface thoroughly to remove dust.
• Optional Sealing:
• For areas exposed to water, apply a sealer for added water resistance and durability, especially in high-traffic or moisture-prone areas like bathrooms and kitchens.

Mas Maya Coating Application Video

Conclusion

Bricklayers have the necessary skills and experience to apply Mas Maya Coating effectively. The techniques involved are well within their expertise, making it a suitable and practical choice for various surfaces, both interior and exterior. By leveraging their existing skill set, bricklayers can achieve beautiful, durable finishes with Mas Maya Coating.