Applying Mas Maya Coating is a straightforward process that can be completed by both professionals and DIY enthusiasts. Follow these steps for best results:

Step-by-Step Application Guide

1. Surface Preparation:
• Clean the Surface: Ensure the surface is clean, dry, and free from dust, grease, or loose particles.
• Repair: Use Mas Maya Base to repair cracks or holes. Cover grouting and gaps to create a flat surface.
• For Wet Areas: In areas like bathrooms, pools, and outdoor floors, ensure an intact waterproof membrane before applying Mas Maya Coating.
• Primer: Apply Mas Maya Primer to enhance adhesion, especially on non-porous surfaces like tiles. Allow to set for at least one hour before applying the Coating.
2. Mixing the Coating:
• Ratio: Mix Mas Maya Coating powder with clean water at a ratio of 1/3 liter of water per kilogram of powder.
• Mixing Process: Mix by hand or with a mechanical drill until smooth, resembling yogurt. Let rest for 15 minutes before use.
3. Application:
• First Layer:
• Trowel Application: Use a steel trowel to apply a thin coat (~2mm) across the surface, holding the trowel at a shallow angle (15–30°).
• Drying: Allow the first layer to dry until set but still slightly damp, usually a few hours depending on conditions.
• Second Layer:
• Optional Water Mist: Lightly mist the surface with water if needed to prolong working time.
• Trowel Application: Apply a second coat with overlapping strokes for an organic finish.
• Burnishing: When the second coat is partially dry, lightly spray with water and rework with a clean trowel for a smooth finish. Let dry overnight.
4. Finishing:
• Sanding: For a smooth finish, sand with fine-grit sandpaper (e.g., 200 grit) until polished.
• Cleaning: Clean the surface to remove dust.
5. Optional Sealing (For flooring and areas exposed to water):
• Protection: For added durability and water resistance, apply Mas Maya Presealer followed by Mas Maya Sealer using a short-pile roller. Each layer should be applied smoothly, ensuring even coverage.

Mas Maya Coating Application Video

Tips for Best Results

• Practice: If new to Mas Maya Coating, practice on a spare board to refine technique.
• Work in Sections: Tackle small sections to prevent drying lines between sections.
• Ideal Conditions: Apply in moderate temperatures, avoiding direct sunlight or extreme temperatures.
• Tools Required: Steel plaster trowels, fine-grit sandpaper, buckets, cleaning tools, sponges, a water spray gun, and painter's tape.

Conclusion

Applying Mas Maya Coating involves a few key steps: surface preparation, mixing, application of two coats, burnishing, and optional sealing. With proper technique, you can achieve a beautiful, durable finish suitable for a wide range of surfaces.