Can Mas Maya Coating Be Used on Plasterboard?
Yes, Mas Maya Coating can be used on plasterboard. It offers excellent adhesion and versatility, making it suitable for a wide range of surfaces, including plasterboard. Here's how to apply it:
- Surface Preparation:
- Clean the Surface: Ensure the surface is clean, dry, and free from dust, grease, or loose particles.
- Repair: Use Mas Maya Base to repair any cracks or holes in the surface. Also, ensure any grouting and gaps between plasterboard panels are filled for a smooth, even surface before applying Mas Maya Coating.
- Primer (if needed): Apply Mas Maya Primer to enhance adhesion, especially on non-porous surfaces or areas where extra bonding is required. Follow the manufacturer’s instructions for drying times.
- Mixing:
- Ratio: Mix the Mas Maya Coating powder with clean water at a ratio of 1/3 liter of water per kilogram of powder.
- Mixing Process: The powder can be mixed by hand or with a mechanical drill. Mix the powder and water until a smooth, yogurt-like texture is achieved. Allow the mixture to rest for 5 minutes before use.
- Application:
- First Coat:
- Using a steel plaster trowel, apply a thin, even coat of approximately 2mm of Mas Maya across the entire plasterboard surface. Hold the trowel at a shallow angle (about 15-30 degrees) for best results.
- Let the first coat dry until firm, which typically takes a few hours.
- Second Coat:
- Lightly spray the surface with water to extend the working time.
- Apply the second coat in a similar manner to the first, but use varied, slightly overlapping trowel strokes at different angles for a more organic finish.
- Allow the second coat to dry overnight.
- Finishing:
- Burnishing/Polishing:
- Once the final coat is partially dry but still pliable, begin burnishing by pressing firmly with a clean steel trowel in short, overlapping strokes at varying angles to create a polished, marbled sheen. If more working time is needed, spray the surface lightly with water.
- Let the coating dry fully overnight.
- Sanding:
- Sand the surface with fine-grit sandpaper (e.g., 200 grain) until the desired smooth, polished finish is achieved.
- Clean the surface thoroughly to remove any dust.
- Sealing (Optional):
- Protection: For areas exposed to water, apply a sealer for added water resistance and durability, especially in high-traffic or moisture-prone areas like bathrooms and kitchens.
Mas Maya Coating Application Video
Mas Maya Coating's natural composition, breathability, and strong adhesion properties make it an ideal choice for plasterboard, providing a durable, aesthetic finish suitable for various interior applications.