Mas Maya Coating is ideal for interior walls due to its natural, breathable finish, free from VOCs and chemicals, promoting a healthier indoor environment. It can be applied to various surfaces like tiles and wood, ensuring durability. Additionally, it helps regulate indoor humidity, and provides a smooth, elegant finish that enhances any space.
What You'll Need
- Mas Maya Coating
- Mas Maya Primer
- Mas Maya Base (if your surface isn't yet flat and smooth)
- TopSealer OneCoat (optional - for additional protection)
- Steel trowels (various sizes)
- Sandpaper (200-400 grit)
- Clean buckets and sponges
- Painter's tape
- Spray bottle with water
How Much You'll Need
| Wall Size (m²) | Coating (10kg Bags) | Primer (5L) | Onecoat (6L) |
|---|---|---|---|
| 10 m² | 6 bags | 1 bottle | 1 pack (1.2L) |
| 25 m² | 15 bags | 1 bottle | 1 pack |
| 50 m² | 29 bags | 1 bottle | 2 packs |
| 100 m² | 57 bags | 2 bottles | 3 packs |
| 150 m² | 86 bags | 3 bottles | 4 packs |
| 200 m² | 114 bags | 4 bottles | 5 packs |
| 250 m² | 143 bags | 5 bottles | 6 packs |
| 300 m² | 171 bags | 6 bottles | 7 packs |
| 400 m² | 229 bags | 8 bottles | 9 packs |
| 500 m² | 286 bags | 10 bottles | 11 packs |
| 600 m² | 343 bags | 12 bottles | 13 packs |
| 800 m² | 457 bags | 16 bottles | 17 packs |
| 1000 m² | 571 bags | 20 bottles | 22 packs |
Installation Guide
1. Surface Preparation
- Clean the Surface: Ensure the wall is clean, dry, and free from dust, dirt, and any loose materials.
- Repair Imperfections: Fill in any cracks or holes with Mas Maya Base.
- Apply Primer: Use Mas Maya Primer to improve adhesion. Apply evenly with a brush or roller and let it dry according to the manufacturer's instructions.
2. Mixing the Plaster
- Mixing Ratio: Combine Mas Maya Coating powder with clean water at a ratio of ⅓ liter of water per kilogram of powder.
- Mixing Process: Mix thoroughly using a mechanical drill with a mixing paddle. Let it rest for 5 minutes, then stir again until the consistency is similar to yogurt.
3. Application of the First Coat
- Apply First Coat: Using a steel trowel, apply a thin, even layer of 2 mm across the entire wall. Hold the trowel at a shallow angle (15-30 degrees) for the best results.
- Drying: Allow the first coat to dry overnight, avoiding direct sunlight on the surface.
4. Application of the Second Coat
- Dampen the Surface: Lightly mist the wall with water to extend the working time of the plaster.
- Apply Second Coat: Apply the second layer similarly to the first but vary your trowel strokes for a more textured finish. Use overlapping, multidirectional strokes to create an organic, cloudy effect if desired.
- Burnishing: Once the second coat is partially dry but still slightly pliable, use a clean steel trowel to compress and smooth the surface. This creates the polished, marbled appearance typical of Mas Maya.
5. Finishing Touches
- Sanding: After the plaster has fully dried, lightly sand the surface with 200-400 grit sandpaper to achieve a smooth, polished finish.
- Cleaning: Wipe down the surface with a clean, dry cloth to remove any dust from sanding.
6. Optional Sealing
- Apply TopSealer Onecoat (Optional): For added durability and moisture resistance, apply two coats of TopSealer Onecoat. Allow the first coat to dry for 8-24 hours before applying the second. This is highly recommended in areas prone to moisture or frequent cleaning.
Tips for Success:
- Work in Sections: Divide the wall into smaller sections to avoid the plaster drying too quickly and to prevent visible seams.
- Practice: If new to applying plaster, practice on a spare board before working on your walls.
- Environmental Conditions: Avoid applying the coating in direct sunlight or extreme temperatures. Ideal conditions are moderate temperature and humidity.
Our sample plaques are perfect for getting a feel of Mas Maya and finding the ideal colour for your project.